ABOUT US
We are an expert provider of advanced machine vision inspection solutions & technology. The company core mission it's to deliver an integrated machine visions system with the principles of cost-effectiveness, efficiency, and high performance.
OUR STRENGTH
Once our team received the brief from our clientele, we'll perform an overview analysis towards every possibilities and scenarios by applying our company's core principles of cost effectiveness, efficiency and high performance.
VISION & MISSION
To be the most innovative vision inspection system provider in the world with newest technology and supporting team & Committed to provide high-end vision inspection system to semiconductor industries for increase customer's product quality and reduce manpower.
Malaysia, China, Taiwan, Thailand, Vietnam, Singapore, Philippines, Europe, and Other Countries
Malaysia, China, Taiwan, Thailand, Vietnam, Singapore, Philippines, Europe, and Other Countries
Description
Stationary camera station with high speed and high accuracy vision inspection system which support multiple package and type. Handler is designed with double shutter in order to achieve higher output. Automated conveyor system is used to transport multiple magazines rack horizontally. Gripper system is used to hold and lift magazine racks precisely to pusher station. Pusher is loaded with spring to prevent jam occurs. Laser sensor is installed to detect the presence or absence of frame. Shutter is equipped with built-in jig and index hold sensor to track frame alignment to ensure frame is in position. Shutter moves in X & Y axis for vision inspection. Clamper is used to reduce the warping of the frame.
| Package Type | Semiconductor Device |
|---|---|
| Accuracy | +/- 0.5 MILS |
| Controller | PC Based |
| AVI Capability | No Bond / Missing Wire / Bond Width Long Tail / Off Pad Bonding .etc |
| Communication | IO, Serial Port, Ethernet |
| Dimension | 2060MM(L) X 1090MM(D) X 1070MM(H) |
| Group / Category | Specification | Value | Unit |
|---|---|---|---|
| General | Model | AWB Series | - |
| Footprint | 2060 x 1090 x 1070 |
mm | |
| Weight | 1300 | kg | |
| Temperature | 5℃~40℃ | - | |
| Noise Level | Below 70 | db | |
| Electrical Supply | Voltage (Tolerance) | 240 (± 5%) |
V |
| Frequency (Tolerance) | 50 (± 5%) |
Hz | |
| Power | 3 | kW | |
| Phase Type | Single | - | |
| Air Supply (Passive) | Pressure | 5 | Bar |
| Max Flow Rate | 20 | L/min | |
| Inlet Pipe Diameter | 6 | mm |
Description
A stationary 5 sides camera station (supports up to 11 cameras) and movable top camera station with high speed and high accuracy vision inspection system which support multiple package and type. Handler is designed with 28 picker head in order to provide higher output. It also features auto pitching for multiple tray pitching, tray stacker system, shuttle system, sorting system & axis inspection.
| Group / Category | Specification | Value | Unit |
|---|---|---|---|
| General | Model | AT2T Series | - |
| Footprint | 1900 x 1400 x 1760 |
mm | |
| Weight | 1500 | kg | |
| Temperature | 5℃~40℃ | - | |
| Noise Level | Below 70 | db | |
| Electrical Supply | Voltage (Tolerance) | 240 (± 5%) |
V |
| Frequency (Tolerance) | 50 (± 5%) |
Hz | |
| Power | 3 | kW | |
| Phase Type | Single | - | |
| Air Supply (Passive) | Pressure | 5 | Bar |
| Max Flow Rate | 20 | L/min | |
| Inlet Pipe Diameter | 6 | mm |
Description
This is a high speed and high accuracy vision inspection system which provides mapping view and information. Its front pusher is installed with laser sensor to detect the absence and presence of the frame. Its shutter is equipped with pneumatic clamper and moves in X & Y axis for vision inspection. Vacuum sensor is installed in gripper system to detect frame slippage. It contains inking system to do marking on defect unit for ease of traceability. The frame will then be transfer back to the magazine after vision inspection and inking for defect unit.
| Package Type | Semiconductor Device |
|---|---|
| Minimum Detection Area | 3mil × 3mil |
| Controller | PLC or PC Based |
| AVI Capability | 2D Mark Inspection 2D Package Inspection Bottom Pad & Lead Inspection Bottom Package Inspection .etc |
| Communication | IO, Serial Port, Ethernet |
| Dimension | 1900MM(L) X 900MM(D) X 1650MM(H) |
Description
A high speed vision inspection handler for post mold packages which provides top and bottom surface inspection. This handler is integrated with two insulation tester with reject magazine sorting. Dual magazine on loader and unloader to achieve zero stop time while exchange magazine.Post inspection lead punch and post-punch inpection are equiped in this handler.
| Group / Category | Specification | Value | Unit |
|---|---|---|---|
| General | Model | AMD Series | - |
| Footprint | 2000 x 1000 x 1800 |
mm | |
| Weight | 1500 | kg | |
| Temperature | 5℃~40℃ | - | |
| Noise Level | Below 70 | db | |
| Electrical Supply | Voltage (Tolerance) | 240 (± 5%) |
V |
| Frequency (Tolerance) | 50 (± 5%) |
Hz | |
| Power | 3 | kW | |
| Phase Type | Single | - | |
| Air Supply (Passive) | Pressure | 5 | Bar |
| Max Flow Rate | 20 | L/min | |
| Inlet Pipe Diameter | 6 | mm |
Description
The handler is installed with automated purging system for auto re-test function. This high speed and high accuracy vision inspection system able to support varies of pocket width. The conversion method is easy by simply remove the pin locator and adjust to desire pocket width. An indexer is used on track for more precise pocket position movement. The detected defect unit will be moved to automated sticker for verification. This handler is designed with 2 tracks to save operator's handling time. It comes with built-in calibration jig for easy calibration.
| Group / Category | Specification | Value | Unit |
|---|---|---|---|
| General | Model | ARR2D2 | - |
| Footprint | 700 x 600 x 1850 |
mm | |
| Weight | 500 | kg | |
| Electrical Supply | Voltage (Tolerance) | 240 | V |
| Frequency (Tolerance) | 50 | Hz | |
| Phase type | Single | - | |
| Air Supply (Passive) | Pressure | 5 | Bar |
| Max Flow Rate | 110 | L/min | |
| Inlet Pipe Diameter | 8 | mm |
Description
Stationary camera station with high speed and high accuracy vision inspection system which support multiple package and type. Handler is designed with single shuttle only. Pusher is loaded with spring to prevent jam occurs and transfer the product in the machine. Shutter is equipped with built-in jig and index hold sensor to track frame alignment to ensure frame is in position. Shutter moves in X & Y axis for vision inspection. Clamper is used to reduce the warping of the frame.
| Package Type | Semiconductor Device |
|---|---|
| Accuracy | +/- 0.5 MILS |
| Controller | PC Based |
| AVI Capability | No Bond / Missing Wire / Bond Width Long Tail / Off Pad Bonding Broken Wire .etc |
| Communication | IO, Serial Port, Ethernet |
| Dimension | 1310MM(L) X 830MM(D) X 1350MM(H) |
| Group / Category | Specification | Value | Unit |
|---|---|---|---|
| General | Model | AMB Series | - |
| Footprint | 1310 x 830 x 1350 |
mm | |
| Weight | 750 | kg | |
| Temperature | 5°C~40°C | - | |
| Noise Level | Below 70 | db | |
| Electrical Supply | Voltage (Tolerance) | 240 (± 5%) |
V |
| Frequency (Tolerance) | 50 (± 5%) |
Hz | |
| Power | 1.5 | kW | |
| Phase type | Single | - | |
| Air Supply (Passive) | Pressure | 5 | Bar |
| Max Flow Rate | 20 | L/min | |
| Inlet Pipe Diameter | 6 | mm |
Mark Inspection
Lead Inspection
BGA Package Inspection
Bottom Lead Inspection
Side Lead Inspection
Bottom Package Inspection
Front of Line
Front of Line
Front/middle of Line involves integrated circuit (IC) fabrication where wafer processing operation is being conducted. We offer variety of vision inspection among front of line processes such as plating, die attach, ball attach, wire bond, molding, laser mark, trim and form, saw and singulation, wafer mapping.
Middle of Line
Middle of Line
Front/middle of Line involves integrated circuit (IC) fabrication where wafer processing operation is being conducted. We offer variety of vision inspection among front of line processes such as plating, die attach, ball attach, wire bond, molding, laser mark, trim and form, saw and singulation, wafer mapping.
End of Line
End of Line
End of line processes refer to the test, assembly and packaging of semiconductor products before delivering. We offer vision inspections and measurement at final test process, tester and vision handler in various forms such as tape, tray and reel.
Keeping our pace with the trend nowadays, our machine vision system & technology are too capable towards other high demanded electronics industries such as Connector, hard disk and etc.
Our custom design vision system that specially caters for the medical industry are capable in not just high-speed performances but yet extreme precise accuracy when put to the test.
ACA’s do provide custom machine vision solutions when comes to high volumes assembly tasks which to assist or minimize onto human error especially in automotive industry.